Accessories

  • Victron Global Remote

    zsd-global-remote

    Obtaining system information, wherever and whenever
    The Global Remote is a modem which sends alarms, warnings and system status reports to cellular phones via text messages (SMS). It can also log data from Victron Battery Monitors, Multis, Quattros and Inverters to a website through a GPRS connection. The use of this website is free of charge. The idea is simple: you can use it to get SMS alarms from a Multi, a Battery System, or both. When monitoring the usage of batteries, it can be extremely helpful to receive under and overvoltage alarms; whenever they occur. For this purpose, the Global Remote is perfect. A prepaid SIM-card (for example) in combination with the Global Remote is adequate for remotely monitoring your system.

  • Victron Digital Multi Control

    zsd-multicontrol

    This panel is intended both for Multis and Quattros. It allows PowerControl and PowerAssist current limit setting for two AC sources: a generator and shore side current for example. Setting range: up to 200 Amps. The brightness of the LEDs is automatically reduced during night time.

  • Victron BMV-700 Battery Monitor

    zsd-bmw-70-battery-monitor

    The BMV-700 is our newest high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.

  • Victron Battery Alarm GX

    zsd-battery-alarm

    The Battery Alarm is a small and low cost alarm panel which monitors your battery bank. It features both audible and visual alarms, as well as a potential free contact with normally open and normally closed contacts. Alarm thresholds and hysteresis are programmable by DIP switches.

  • Victron Filax 2 Ultrafast Switch

    zsd-ultra-fast

    Filax: the ultra-fast transfer switch 
    The Filax has been designed to switch sensitive loads, such as computers or modern entertainment equipment from one AC source to another. The priority source typically is the mains, a generator or shore power. The alternate source typically is an inverter. With its switching time of less than 20 milliseconds, sensitive loads will continue to operate without disruption. The Filax is not intended to supply high power household equipment like washing machines or electric motors.

  • Victron wired AC sensor

    zsd-wired-sensor

    Three phase energy meter, maximum 65 A per phase. Can also be used in single phase systems.

    Typical usage:

    1. In Grid-parallel Hub-4 installations to measure the power of the whole system.
    2. Measure the output of a PV Inverter and display it on the Color Control GX and related monitoring websites and Apps.
  • Schneider circuit breakers

    zsd-circuit-breakers

    Thermal-magnetic circuit breakers from 6 to 250A (up to 400V) for the protection of industrial equipment control circuits. Also available for DC and AC systems.

  • Schneider Solar Distribution Panel

    null

    The ConextTM SW Power Distribution Panels are pre-wired out of the box and labeled to support the integration of Conext SW inverter/chargers with a Conext MPPT Solar Charge Controller, battery bank and load centers. Designed to save installers significant time, effort and costs on every installation, the Distribution Panels offer excellent value when compared to customized options.

    The solution set includes a DC distribution panel complete with a pre-installed 250 A DC breaker and additional breaker slots for integrating multiple DC power sources. AC distribution panels are also available for 120/240 VAC and 230 VAC requirements, pre-installed with multiple AC breakers for integrating AC power sources and loads. Each AC panel also supports the integration of fuel-based generators providing a central load center for managing an installation’s AC power needs.

  • Schneider Solar System Control Panel

    zsd-system-control-panel

    The ConextTM System Control Panel (SCP) eliminates the need for separate control panels for each device and gives a single point of control to set up and monitor the entire Conext inverter charger system, including Conext MPPT Solar Charge Controllers. Featuring a graphical backlit liquid crystal display, the SCP selectively displays configuration, status and diagnostic information for all devices connected to the XanbusTM network.

  • Schneider Solar Battery Monitor

    zsd-solar-monitor

    ConextTM Battery Monitor indicates hours of battery based runtime and determines battery bank state of charge. Conext Battery Monitor shares key battery bank parameters with Conext XW+ inverter/chargers improving overall system performance of 24V and 48V battery banks. Detecting battery string imbalance is determined using innovative mid-point sensing technology providing time to address the issue before performance is significantly impacted.

Want to know more about ZSD?

Call us at +20 12 22202554 to request a quotation, or find us on:

Our address

ZSD
25 Misr Helwan Agriculture Road, 3rd Floor El Zeini Tower, El Maadi
Cairo, EGYPT PO BOX 22, 11431
EGYPT